IQOS 2.4 Plus Diagnostic tool

Language English

If there’s a problem with your IQOS, there won’t be for long. Our self-diagnostic tool can quickly identify and fix any problems you’re having with your device. Sounds good, doesn’t it? To get started, choose your IQOS device.

Try our Diagnostic Tool

Haven't registered your device yet? No problem, just try one of the troubleshooting options below.

IQOS ILUMA i PRIME

IQOS ILUMA PRIME

IQOS ILUMA

IQOS ILUMA ONE

IQOS 3 DUO

IQOS 3

IQOS 3 MULTI

IQOS 2.4 PLUS

Your device might be out of power

How to check if your IQOS 2.4 PLUS device is charged:

Check that the IQOS 2.4 PLUS Pocket Charger is turned on, by pressing the Pocket Charger’s button for 1 second. The lights should turn on. If they don’t, press and hold the button for 4 seconds.

If you don't see any lights, charge the Pocket Charger using the official IQOS AC Power Adaptor and cable*.

To find out if your IQOS 2.4 PLUS Holder is charged just press the button on your Pocket Charger (while your holder is in sight) and if the round light on top of your Pocket Charger is steady, your holder is ready to use. If it is pulsing then it is currently charging. Alternatively just remove the holder and check whether the light is on. If it is then your holder is charged and ready to go.

* Note that laptop USB ports may not have enough power to charge your pocket charger. We recommend using an electrical outlet instead.

Resetting your IQOS 2.4 PLUS

If your IQOS 2.4 PLUS is charged, but still not working, the next step is to reset the IQOS 2.4 PLUS device.

Press the two buttons below the battery status lights simultaneously and you will see that after about 2 seconds all lights blink white for a few times.

A good clean could be the answer

Does it feel difficult to draw on your HEETS while using your IQOS 2.4 PLUS? Not getting enough aerosol when using your IQOS 2.4 PLUS? These issues can likely be resolved by using the IQOS cleaning tool and cleaning sticks to clean the heating chamber and the IQOS cap.

Cleaning your IQOS 2.4 PLUS regularly and with the right tools will not only ensure that you are getting the optimal real tobacco taste experience; but it can also solve some of the issues you may be experiencing with your IQOS 2.4 PLUS.

White IQOS 2.4 PLUS holder and charger on a wooden table next to a cup

Can’t get your IQOS 2.4 PLUS to charge?

If your IQOS 2.4 PLUS Holder is not charging properly, it might be that the connectors need cleaning. Just clean the connectors of your IQOS Holder with the IQOS cleaning sticks.

What to do if there’s a temperature issue

Do you see a red blinking light on your IQOS Pocket Charger or a red light on your IQOS 2.4 PLUS Holder? This could be because your IQOS is too cold or too hot.

IQOS 2.4 PLUS operates in a temperature range between 10° and 40° C. If the ambient temperature is low, try warming the IQOS 2.4 PLUS Holder in your hand for at least 1 minute. If it is too hot, take it with you to a colder place and it should be working again once it has cooled down.

A broken blade or other damage?

Check to see if your IQOS 2.4 PLUS has a broken blade or any other physical damage. If it does, we are sorry that this happened to you. Please contact Customer Care and we will support you with this issue.

Sometimes cleaning the IQOS 2.4 PLUS Holder can damage the blade inside your IQOS 2.4 PLUS Holder. Be careful not to exert force onto the blade when cleaning your IQOS 2.4 PLUS Holder. Also ensure you never twist your HEETS tobacco stick while it's in the holder. This movement can damage the heating blade and disrupt your IQOS 2.4 PLUS experience.

The IQOS 2.4 Plus is no longer sold. In the FAQ section, you can find out everything you need to know about warranties, support and exchanges.