Before the first use, fully charge the Pocket Charger with a compatible AC Power Adaptor (5V, 2A, type-C output) and type-C charging cable from an electrical outlet.
A full charge takes approx. 135 minutes (2 hours 15 minutes).
You can charge the IQOS ILUMA i™ Pocket Charger with or without the Holder inserted.
It can take up to 10 minutes to fully charge the Holder for the first time (after opening the packaging) or after a long period of inactivity. This is normal. 
IQOS ILUMA i™ Pocket Charger does not require a full charge to work; however, we recommend to fully charge it before the first use.

To charge your Holder, insert the Holder into the Pocket Charger, and close the Wrap to charge. The Holder Status Light will show the Holder battery level.

1. Turn on the device – press and hold Pocket Charger Button for 4 seconds, then release; Pocket Charger Status Lights and Holder Status Lights will turn ON slowly.
2. Insert Holder into Pocket Charger and close Door to charge. Holder Status Light will show Holder battery level.
3. Insert SMARTCORE STICK™ to line on filter until Holder vibrates (image 1).
4. Preheating starts automatically (AutoStart) or by swiping up on Touch Screen. Touch Screen will show preheating status (approx. 20 seconds) (image 2).
5. 2nd vibration – you can start using (image 3).
6. Countdown Light on the Touch Screen will indicate the remaining time of the experience (image 4).
7. Nearly complete – to signal last 30 seconds or last 2 puffs, Holder will vibrate.
8. Remove used SMARTCORE STICK™ and dispose as per Safety Warnings and Instructions.
9. Insert Holder into Pocket Charger to recharge.

IQOS ILUMA i™ is our latest innovation in heating devices that offers a range of advanced features for a seamless, clean and more flexible experience than before.
It is equipped with the new Touch Screen so that you can quickly see the information about your experience:
•    Preheating status (duration, completion) 
•    Time left for your experience
•    Number of available experiences (one or two)
You can also enjoy additional new advanced features to adapt your experience to your usage:
•    Have up to 3 consecutive uses (only available in Performance Mode when pause is not activated)
•    Pause your experience with Pause Mode feature
•    You may get 4 extra puffs with FlexPuff feature (FlexPuff activation and number of puffs depend on individual usage patterns. Thus, extra puffs might not apply to all adult consumers and/or experiences. FlexPuff does not activate when pause is used.)
•    Adaptable Holder battery with 2 FlexBattery modes
IQOS ILUMA i™ is designed to be used only with SMARTCORE STICKS™.
IQOS ILUMA i™  is available in 5 colours: Breeze Blue, Leaf Green, Digital Violet, Vivid Terracotta, Midnight Black.

Important information:
•    IQOS ILUMA i is not risk free and provides nicotine, which is addictive. 
•    IQOS ILUMA i is for adults who would otherwise continue to smoke or use other nicotine products. 
•    IQOS ILUMA i is not an alternative to quitting and is not designed as a cessation aid. 
•    You can find all relevant safety information about IQOS ILUMA i in the Important Information section on iqos.com.
 

To check the charge level of the Pocket Charger, short press the Pocket Charger Button. The Status Lights will turn ON to indicate battery level: 
o    4 LEDs = more than 75% charged.
o    1 LED = less than 25%. 
o    1 LED orange triple blink = battery depleted. Need to charge.

To check the Holder Status – tilt Holder towards you or short press the Touch Screen. The Holder Status Lights will show the Holder battery level.
If the battery is depleted, the Touch Screen will show the sign as below (zero inside the light ring and no lights on the light ring).

Before the first use, fully charge the Pocket Charger with a compatible AC Power Adaptor (5V, 2A, type-C output) and type-C charging cable from an electrical outlet.
A full charge takes approx. 135 minutes (2 hours 15 minutes).
You can charge the IQOS ILUMA i PRIME™ Pocket Charger with or without the Holder inserted.
It can take up to 10 minutes to fully charge the Holder for the first time (after opening the packaging) or after a long period of inactivity. This is normal. 
IQOS ILUMA i PRIME™ Pocket Charger does not require a full charge to work; however, we recommend to fully charge it before the first use.

To charge your Holder, insert the Holder into the Pocket Charger, and close the Wrap to charge. The Holder Status Light will show the Holder battery level.

To reset your IQOS ILUMA i PRIME™, place the Holder in the Pocket Charger and press the Pocket Charger Button for 10 seconds. All Status Lights will turn OFF, blink twice, and turn ON to confirm a RESET.

1. Turn ON the device – press and hold Pocket Charger Button for 4 seconds, then release; Pocket Charger Status Lights and Holder Status Lights will turn ON slowly.
2. Insert Holder into Pocket Charger and close Wrap to charge. Holder Status Light will show Holder battery level.
3. Insert the SMARTCORE STICK™ to the line on the filter until Holder vibrates (image 1).
4. Preheating starts automatically (AutoStart) or by swiping up on Touch Screen. Touch Screen will show preheating status (approx. 20 seconds) (image 2).
5. 2nd vibration – you can start using (image 3).
6. Countdown Light on the Touch Screen will indicate the remaining time of the experience (image 4).
7. Nearly complete – to signal last 30 seconds or last 2 puffs, Holder will vibrate.
8. Remove used SMARTCORE STICK™ and dispose as per Safety Warnings and Instructions.
9. Insert Holder into Pocket Charger to recharge.
    

IQOS ILUMA i PRIME™ is the new generation of IQOS ILUMA™ devices that offers a range of advanced features for a clean, seamless and more flexible experience than before.
It is equipped with the new Touch Screen so that you can quickly see the information about your experience:
•    Preheating status (duration, completion) 
•    Time left for your experience
•    Number of available experiences (one or two)
You can also enjoy additional new advanced features to adapt your experience to your usage:
•    Have up to 3 consecutive uses (only available in Performance Mode when pause is not activated)
•    Pause your experience with Pause Mode feature
•    You may get 4 extra puffs with FlexPuff feature (FlexPuff activation and number of puffs depend on individual usage patterns. Thus, extra puffs might not apply to all adult consumers and/or experiences. FlexPuff does not activate when pause is used.)
•    Adaptable Holder battery with 2 FlexBattery modes
IQOS ILUMA, I PRIME™ is designed to be used only with SMARTCORE STICKS™.
IQOS ILUMA i PRIME™ is available in 4 colours: Breeze Blue, Aspen Green, Garnet Red, Midnight Black.

Important information:
•    IQOS ILUMA i PRIME is not risk free and provides nicotine, which is addictive. 
•    IQOS ILUMA I PRIME is for adults who would otherwise continue to smoke or use other nicotine products. 
•    IQOS ILUMA i PRIME is not an alternative to quitting and is not designed as a cessation aid. 
•    You can find all relevant safety information about IQOS ILUMA i PRIME in the Important Information section on iqos.com.
 

Available only for IQOS ILUMA i PRIME™ and IQOS ILUMA i™ devices, you can check the number of available experiences by checking the Touch Screen.

Short press on the Touch Screen:

• Two horizontal dashes indicate – 2 available experiences.
• One horizontal dash indicates – 1 available experience.
• One horizontal dash after the 2nd experience indicates that you can have a 3rd experience available.
• The number “0” indicates that your battery is depleted. No experience available. Please charge your Holder.

There are two LED intensity levels of your Touch Screen: “High” and “Low” – for IQOS ILUMA i PRIME™ and IQOS ILUMA i™ devices.

To change the LED intensity, tap five times on the Touch Screen. Your LED intensity level changes in between 100% (High) & 30% (Low).